The Lavalier and PinMic will require the MiCon-2 connector. Simply clip one on over the transmitter's built-in mic, and you're good to head on out.
official If you want to connect the Wireless GOs to your phone you will also need the SC4 adapter cable – simply plug the SC11 single input into the SC4 and then into your mobile device. You can connect your Wireless GO receiver to a mixing desk or XLR input by using the VXLR+.
We'll show you the exact steps, give you a launch schedule & help you along the way. Also comes in white for easy concealment against bright clothing. The transmitter and receiver pieces are lightweight (both 31g, according to RODE). For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. In the box, you'll get two fur windshields, two USB-A to USB-C cables, one 3.5-3.5mm cable, a little storage wallet, and the RODE Wireless Go kit itself. I was able to use the SC4 adapter by plugging it into the headphone/headset jack. The Rode Wireless GO's innovative transmitter features a built-in omnidirectional mic so you can use it as a clip-on lav mic, and you can also use it as a standard wireless transmitter with 1/8" mic input for your own lavalier mic. At the time of writing, you can buy a brand new RODE Wireless Go for $210 on Amazon.com, and £150 on Amazon UK. Der Clip passt außerdem exakt in den Standard-Blitzschuh Ihrer DSLR-Kamera, man kann den Empfänger aber auch an einem Kameragurt oder Kleidungsstück befestigen. All rights reserved. This is done on 2.4 GHz frequency band, as opposed to Ultra High Frequency.